Production Thematic Current Location : Home > Production line configuration-200 t/h limestone solution

200 t/h limestone solution

Yield: 200 t/h Materials: Limestone mostly Feeding Requirements: ≤630mm Discharge Requirements:
Major equipment models:

Vibrator feeder: one ZSW420 * 110
Jaw Crusher: one PE750 * 1060
Cone Crusher: one extra-sized S155B; one medium-sized S155B
Shaker: one SZZ-2-2460; one SZZ-4-2460

Characteristics of the material?
The main component of limestone is calcium carbonate (CaCO3). Most lime and limestone are used as building materials. In addition, they are also important raw materials for industry. Limestone can be directly processed into stone and fired into quicklime. There are quicklime and slaked lime. The main component of quicklime is calcium oxide. They are generally blocky. Pure calcium oxide is white; it is light gray or light yellow when containing impurities. Lime will become slaked lime after absorbing moisture or water; its main ingredient is Ca (OH) 2. The slaked lime can be mixed to lime slurry, lime putty, lime mortar to work as coating material and tile adhesives. In some places it is also called: limestone, calcite, marble, chalk, aragonite, white marble.
The advantages of our solutions?
Limestone processing production line consists of vibrating feeder, jaw crusher, cone crusher and vibrating screen. The second break applies three lines. When the machine of one line doesn’t work, the other two lines will operate normally. The materials from impact crusher have good shape, which enhances the performance. What’s more, intermediate silo is designed in the production line; the production of the entire line is improved.
Process Solutions
First stage: limestone in the hopper is put into jaw crusher by vibrating feeder. The small raw materials from the vibrating sieve and those after jaw crushing enter the intermediate silo.
Second stage: the materials of intermediate silo are transported to cone crusher by vibrating feeder.
Third stage: the limestone after crushing is taken to vibrating sieve by the conveyor; stones of different sizes are screened out. Those meeting the size requirements are taken to the finished material pile though the belt conveyor; the others are put into the impact crusher again for re-crushing to form a closed loop.

You may also be interested in the following information?


If you have any questions or needs, you can be entered in the form below. We will leave your contact information promptly contact you. (Note: Contact and demand is required)

  • Contact:
  • Contact:
  • Address:

Home | Products | Solution | Contact Us | Feedback | Service     Tel:0579-85861908  All Rights Reserved © 2013 Zhejiang B&W Mining Machinery Co. Ltd  破碎机  黑白矿机  破碎机设备生产厂家