Current Location : Home > Crushing Equipment > PS Series Cone Crusher

PS Series Cone Crusher

【Feed size】:25-299 mm

【Production capacity】:10-500t/t

【Applications】:it is broadly applied in the industries of ,Highway, railway, airport runway, mining, building materials

【Applicable materials】:limestone, cobble, quartz, etc

【Introduction】:
 

In  the  highly  competitive  crushing and screening equipment market nowadays, without insistent Innovation and Developments, it  is  naturally to be eliminated by market because of old fashion products. B&W  listens  to customer's voice and  finding out clients'  demand  and  makes  continuous  improvement  on machines. By continuous communications  with  clients  deeply  and  realizes the required characteristics of coarse, medium and  fine crushing cone crusher:

  • download Download
  • download Purchase Hotline 0086-579-85866118

Consultation

Product advantages

 

1,  Compact design and small size

 2,  It can set up in smaller discharge during production

 3,    Minimum operation cost

 4, It can fit for different applications in one crusher

  5, B&W R & D team incorporates the above advantages which are difficult to  integrate  together  into  new generation PS series high speed cone crusher. It  is  wider  application,  satisfaction  of  most  difficult operation conditions, higher capacity and lower operation cost.


Technical parameters

Crusher Size

Cavity

Feed opening (mm)
(close side)

Feed opening (mm)
(open side)

Minimum setting
(mm)

P1S
Extra Fine
25
66
6
Fine
95
128
13
Medium
125
156
16
Coarse
185
208
19
Extra Coarse
205
230
38
P2S
Extra Fine
25
72
6
Fine
107
148
14
Medium
150
190
17
Coarse
211
240
20
Extra Coarse
233
267
25
P3S
Extra Fine
40
104
6
Fine
111
164
14
Medium
198
245
20
Coarse
252
292
25
Extra Coarse
299
333
30


Closed Side Setting

Size

T/H 10mm 13mm 16mm 19mm 22mm 25mm 32mm 38mm 45mm 51mm
P2S t/h 86-116 116-146 136-176 146-186 156-196 166-216 186-231 206-246    
P3S t/h 110-136 146-180 176-216 196-236 216-256 226-276 246-316 296-376 346-436  
P4S t/h 136-171 180-226 221-276 250-340 270-340 290-366 356-486 356-486 406-556 460-626

Working Principle

 

PS series cone crusher breaks rock by squeezing the rock between an eccentrically gyrating spindle, which is covered by a wear resistant mantle, and the enclosing concave hopper, covered by a manganese concave or a bowl liner,as rock enters the top of the cone crusher, it becomes wedged and squeezed between the mantle and the bowl liner or concave. Large pieces of ore are broken once, and then fall to a lower position (because they are now smaller) where they are broken again. This process continues until the pieces are small enough to fall through the narrow opening at the bottom of the crusher.


Structrue drawing

 

You may also be interested in the following information?

Feedback

If you have any questions or needs, you can be entered in the form below. We will leave your contact information promptly contact you. (Note: Contact and demand is required)

  • Contact:
  • Contact:
  • Address:

Home | Products | Solution | Contact Us | Feedback | Service     Tel:0579-85861908  All Rights Reserved © 2013 Zhejiang B&W Mining Machinery Co. Ltd  破碎机  黑白矿机  破碎机设备生产厂家