Current Location : Home > Crushing Equipment > PE Jaw Crusher

PE Jaw Crusher

【Feed size】:125-1100

【Production capacity】:0.6-300

【Applications】: It is widely used to crush materials preliminarily in quarry, metallurgical, construction, railway, water conservancy, chemistry industries etc

【Applicable materials】:Granite, Marble, Basalt. Limestone, Quartz, Cobble, Iron Ore, Copper Ore Etc

【Introduction】:
  

     PE jaw crusher is a kind of hard stone breaker, used to crush various stones, broadly applied in quarry, metallurgical, construction, railway, water conservancy, chemistry industries. All Specifications of PE jaw crusher are available, and the feed size is quite wide which  ranges from 80mm to 950mm, and the compressive strength of it is 300Mpa, all of which make it the best choice among all other crushers for primary or medium crushing

  

  • download Download
  • download Purchase Hotline 0086-579-85866118

Consultation

Product advantages

  

1, Large crushing
ratio, even particle size.

2, Convenient
replacement, easy maintencance.

3, Simple structure,
reliable operation, low operating charge.

4, Low noise,
Little dust

5, It can meet
different requirements for its large adjusting range of output size.

6,High quality stainless
steel assembly and forging-blank processing eccentric shaft make the crusher significantly
stable. Compare with other similar crusher, we adoped the larger and much durable
eccentric shaft, which greatly contribute the reliable operation and high working
load.

7,To guarantee the
precison of the crusher, we introduce the world’s advanced casting skill and digital
devices. All the material we chose to make the crusher is wear-resistant, anti-oppression,
which greatly extended the lifespan of crusher.

  

Technical parameters


Fine crushing type  

Model
Feed opening size (mm)
Max feed
size (mm)
Adjustment range of discharge opening(mm)
Capacity
(m³/h)
Eccentric shaft speed
(r/min)
Motor power (kw)
weight
(t)
PEX100*600
100*600
80
7-21
2-8
330
7.5
1
PEX150*750
150*750
120
18-48
5-16
320
15
3.5
PEX250*750
250*750
210
25-60
8-22
330
22
4.9
PEX250*1000
250*1000
210
25-60
10-32
330
30
6.5
PEX250*1200
250*1200
210
25-60
13-42
330
37
7.7
PEX350*750
350*750
300
30-80
16-35
300
30
6.5
PEX300*1300
300*1300
250
30-80
15-55
300
75
11

Coarse crushing type  
Model
Feed opening size (mm)
Max feed
size (mm)
Adjustment range of discharge opening(mm)
Capacity
(m³/h)
Eccentric shaft speed
(r/min)
Motor power (kw)
weight
(t)
PE150*250
150*250
125
10-40
0.6-3
300
5.5
1
PE250*400
250*400
210
20-60
3-13
320
15
2.8
PE400*600
400*600
340
40-100
10-34
275
30
6.5
PE500*750
500*750
425
50-100
20-52
275
55
10.5
PE600*900
600*900
500
65-160
30-75
250
55
15.5
PE750*1060
750*1060
630
80-160
72-130
250
110
28
PE900*1200
900*1200
750
95-180
90-190
200
132-160
50
PE870*1060
870*1060
670
200-260
160-210
250
110
30.5
PE1000*1200
1000*1200
850
230*265
197-215
200
132-160
51
PE1200*1500
1200*1500
950
150-350
188-500
180
160-250
100.9
PE1400*1800
1400*1800
1100
500-1100
180-300
180
250-315
120

Working Principle

 The motor drives the belt and the grooved wheel which connect the eccentric shaft. Through the movement of eccentric shaft, the moveable jaw plate moves up and down. When the movable jaw plate moves up, the angle between it and the toggle plate will be enlarged, so the movable jaw plate will get close to fixed jaw plate, then the material will be pressed and crushed, when the movable jaw plate moves down the angle between it and the toggle plate will be reduced, movable jaw plate will move away from fixed jaw plate due to the tension rod and springs. At this moment the crushed materials will be discharged at discharge opening. With moving of motor and periodical movement of movable jaw plate, material will be crushed and discharged gradually
  

■  Jaw Crusher Note:

 Before using, one should check all the parts are completelt fixed, especially filling the bearing part grease lubricant, and then recheck the blot, make it all fixed. Don’t forget to clean the cavity, when finishing all this steps, the machine can be started, while working, make sure your material is conveyed evenly, or it will easily get blocked. Notice
all the wearing parts: swing jaw plate, fixed jaw plate, linear plate. Keep them well maintained!!

Structrue drawing


You may also be interested in the following information?

Feedback

If you have any questions or needs, you can be entered in the form below. We will leave your contact information promptly contact you. (Note: Contact and demand is required)

  • Contact:
  • Contact:
  • Address:

Home | Products | Solution | Contact Us | Feedback | Service     Tel:0579-85861908  All Rights Reserved © 2013 Zhejiang B&W Mining Machinery Co. Ltd  破碎机  黑白矿机  破碎机设备生产厂家