Current Location : Home > Sand production equipment > Sand Washing Machine

Sand Washing Machine

【Feed size】:<10mm

【Production capacity】:20 — 180t/h

【Applications】:Manufactured sand, river sand, scree etc.

【Applicable materials】:

【Introduction】:
  

     Sand washing machine is broadly applied in sand making plant, mining plant, construction, building, chemistry, water conservancy, concrete mixing plant for washing and separating material. Meanwhile,it is also a essential part in sand making and stone crushing line.

  

  • download Download
  • download Purchase Hotline 0086-579-85866118

Consultation

Product advantages

  

1,little sand powder loss

2,almost no wearing parts, except the sand washing screen.

3,long lifespan

4,Easy and convenient maintenance

 5.It has the functions of washing, dewatering and grading; While working, under the movement of rotor, gravel would grind with each other, which helps to remove the impurities from the surface, and destroy the water
vapor layer covered around the gravel

 6,It has the functions of washing, dewatering and grading; While working, under the movement of rotor, gravel would grind with each other, which helps to remove the impurities from the surface, and destroy the water

 

Technical parameters

Model Wheel Diameter
(mm)
Tank length
(mm)
Feed Size
(mm)
Capacity
(t / h)
Speed
(r/min)
Motor Power
(kw)
Water Consumption(t/h) Overall dimension(L*W*H) (mm) Weight
(kg)
XS2610 2600 3220 ≤10 50 0.8-1.5 5.5 4-4.5 3220*2125*2670 2700
XSD3016 3000 3810 ≤10 80 0.8-1.5 15 10-20 3800*2686*3085 3300

Working Principle

       The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Structrue drawing

 

You may also be interested in the following information?

Feedback

If you have any questions or needs, you can be entered in the form below. We will leave your contact information promptly contact you. (Note: Contact and demand is required)

  • Contact:
  • Contact:
  • Address:

Home | Products | Solution | Contact Us | Feedback | Service     Tel:0579-85861908  All Rights Reserved © 2013 Zhejiang B&W Mining Machinery Co. Ltd  破碎机  黑白矿机  破碎机设备生产厂家